Concrete Saw Safety (Walk-Behind and Handheld)
Construction · Ver en español
Talking points
- Use the blade guard at all times — never remove it for a deeper cut or to improve visibility. The guard protects against blade contact and flying debris.
- Wet cutting is the primary silica dust control for concrete saws. The water supply must be connected and flowing before you begin cutting.
- Check the blade RPM rating — it must match or exceed the saw's operating speed. A blade rated below the saw's RPM can disintegrate during use.
- Maintain firm footing and a stable stance. Walk-behind saws can kick or pull if they encounter rebar or an uneven surface.
- Respiratory protection (minimum APF 10, such as an N95) is required in addition to wet cutting when dust is visible or when conditions prevent effective water delivery.
Ask the crew
Is the water supply connected to our concrete saw right now — and is the blade the correct rating for this saw?
Standards this talk is built on
A toolbox talk is a short safety briefing. It supports the training a standard requires; it does not replace it.
Run this talk with your crew and keep the record
In Jobsite, workers sign in on their phones in English or Spanish, and you keep who attended, when, and where, with every other talk your crew has had.
Using an AI assistant? Jobsite's free MCP server serves this library, with OSHA rule text, no sign-in: https://jobsitecerts.com/api/mcp/public (/mcp)
Sign-in sheet
Print this page to collect signatures, or run the talk in Jobsite and workers sign in on their phones.
| Name | Signature | Date |
|---|---|---|
© Jobsite. Free to read aloud, print and use in your own crew's safety meetings. Republishing, reselling or bulk-copying these talks is not permitted.