Bench Grinders and Cut-Off Saws
Construction and general industry · Ver en español
Talking points
- Perform a ring test on all abrasive wheels before mounting. A clear ring means the wheel is sound; a dull thud means it is cracked and must be discarded.
- The work rest must be within 1/8 inch of the wheel. The tongue guard must be within 1/4 inch. Adjust these before starting — not while the wheel is spinning.
- Never exceed the RPM rating on the wheel. A wheel spinning above its rated speed can shatter with explosive force.
- Wear a face shield over safety glasses when grinding. Safety glasses alone do not protect against a wheel burst or large flying particles.
- Let the grinder reach full speed before applying material to the wheel. Do not force material into the wheel — let the abrasive do the work.
Ask the crew
When was the last time the work rest and tongue guard on our bench grinder were adjusted — and are they within spec?
Standards this talk is built on
A toolbox talk is a short safety briefing. It supports the training a standard requires; it does not replace it.
Run this talk with your crew and keep the record
In Jobsite, workers sign in on their phones in English or Spanish, and you keep who attended, when, and where, with every other talk your crew has had.
Using an AI assistant? Jobsite's free MCP server serves this library, with OSHA rule text, no sign-in: https://jobsitecerts.com/api/mcp/public (/mcp)
Sign-in sheet
Print this page to collect signatures, or run the talk in Jobsite and workers sign in on their phones.
| Name | Signature | Date |
|---|---|---|
© Jobsite. Free to read aloud, print and use in your own crew's safety meetings. Republishing, reselling or bulk-copying these talks is not permitted.