OSHA Compliance

OSHA Compliance articles

What OSHA actually requires of construction contractors — recordkeeping, hazard-specific standards, training, and how to stay inspection-ready.

PPE Requirements for Construction Contractors

OSHA obligates construction contractors to assess hazards, certify the assessment in writing, provide and pay for specific PPE, and prove workers demonstrated competence before sta…

October 26, 2026

Lead Exposure Requirements for Construction Contractors

OSHA obligates construction contractors to assess exposures, implement controls, enroll workers in medical surveillance, and maintain written programs before any lead-disturbing wo…

October 14, 2026

Aerial Lift (MEWP) Requirements for Construction Contractors

OSHA's aerial lift standard obligates you to authorize operators, enforce daily inspections, control load limits, and mandate fall protection on boom-supported lifts.

October 7, 2026

Materials Handling Requirements for Construction Contractors

Construction materials handling is governed by 29 CFR 1926.552 for hoists, 1926.251 for rigging, Subpart CC for cranes, and the General Duty Clause for manual handling hazards.

September 30, 2026

Electrical Safety Requirements for Construction Contractors

OSHA's electrical safety standards require you to deenergize equipment before work whenever feasible, restrict work on energized parts to qualified persons, and prove all of it wit…

September 25, 2026

Rigging Requirements for Construction: What OSHA Obligates

Under 29 CFR 1926.251 and Subpart CC, contractors must inspect rigging before each shift, pull defective equipment immediately, and be ready to show documentation for specific qual…

September 18, 2026

OSHA Crane Operation Requirements Construction Contractors Must Meet

You must ensure signal person qualifications, standardized signals, anti-two-block devices, and documented communication plans before every lift regulated by 29 CFR 1926 Subpart CC…

September 11, 2026

Hot Work & Welding Requirements for Construction Contractors

Construction contractors must designate a permit authorizer, clear a 35-foot combustible zone, assign a dedicated fire watch, and control gas cylinders and PPE to comply with OSHA…

September 4, 2026

Heat Illness Prevention Requirements for Construction

Federal OSHA enforces heat illness prevention under the General Duty Clause, not a standalone standard — meaning you must demonstrate a proactive, documented program or risk a cita…

July 8, 2026

Ladder Safety Requirements for Construction Contractors

Under OSHA's construction ladder standard, you have four distinct employer obligations — selection, inspection, training, and removal from service — and missing any one of them put…

July 3, 2026

OSHA Respiratory Protection Requirements for Construction

Under 29 CFR 1910.134—adopted for construction via 29 CFR 1926.103—contractors must run a written respiratory protection program covering hazard assessment, medical evaluation, fit…

July 1, 2026

Hazard Communication Requirements for Construction Contractors

Under 29 CFR 1926.59 — which adopts 29 CFR 1910.1200 by reference — every contractor on a construction site must have a written HazCom program, accessible SDSs, labeled containers,…

June 29, 2026

Trenching and Excavation Safety Requirements for Contractors

Under 29 CFR 1926 Subpart P, every contractor running excavation work carries specific legal duties — protective systems, a designated competent person, daily inspections, and soil…

June 26, 2026

Lockout/Tagout Requirements Every Contractor Must Meet

A compliant LOTO program requires written machine-specific procedures, trained authorized and affected employees, annual periodic inspections, and certified documentation — here is…

June 24, 2026

Confined Space Entry Requirements for Construction

Under 29 CFR 1926 Subpart AA, every contractor whose workers may enter a permit-required confined space must run a written program, issue permits, test the atmosphere, station a tr…

June 19, 2026

Scaffolding Safety Requirements for Construction Contractors

OSHA's scaffold standard under 29 CFR 1926 Subpart L imposes specific duties on every contractor whose workers touch a scaffold — here is what you must be able to prove in an inspe…

June 17, 2026

Fall Protection Requirements for Construction Contractors

OSHA's Subpart M puts specific, enforceable obligations on every construction contractor whose workers are exposed to a fall of 6 feet or more — here is what each one requires and…

June 15, 2026

OSHA Silica Requirements for Construction: A Contractor Compliance Guide

29 CFR 1926.1153 places specific, enforceable obligations on your company — here is what each one requires and where contractors most often fall short.

June 14, 2026

See how Jobsite handles this in practice: Safety & compliance on the platform →