Safety Programs articles
The building blocks of a working safety program — toolbox talks, JHAs, behavior-based observations, incident investigation, and leading indicators.
PPE Inspection Checklist for Construction Sites
OSHA requires you to keep all PPE in sanitary, reliable condition and pull any damaged equipment from service before the shift starts.
October 23, 2026Aerial Lift (MEWP) Inspection Checklist for Construction Sites
A complete, OSHA-grounded aerial lift inspection checklist starts with testing controls daily and physically verifying every safety system before the shift begins.
October 9, 2026Materials Handling Inspection Checklist for Construction Sites
A competent person must inspect rigging and hoists before every shift, document periodic reviews at least annually, and pull damaged gear from service immediately to meet OSHA expe…
September 28, 2026Electrical Safety Inspection Checklist for Construction Sites
A proper electrical safety inspection checklist starts with guarding, verification, and qualified-person controls that OSHA already requires.
September 23, 2026Hoisting & Rigging Inspection Checklist for Construction Sites
A construction-ready rigging inspection checklist follows OSHA's pre-shift and periodic requirements to keep defective slings, hooks, and hardware out of service before they fail.
September 16, 2026Crane Operation Inspection Checklist for Construction Sites
Before operations requiring signals begin, you must verify signal person qualifications, test anti-two-block devices, and confirm that standardized signaling protocols are in place…
September 9, 2026Forklift Inspection Checklist for Construction Sites
OSHA requires every powered industrial truck to be examined before each shift and immediately removed from service if any defect affects safe operation.
August 26, 2026Ladder Safety Inspection Checklist for Construction Sites
An OSHA-aligned ladder inspection checklist tells your competent person exactly what to check, which defects demand immediate removal, and how to document the process so it holds u…
August 24, 2026Trenching Inspection Checklist: What OSHA Requires on Site
A compliant trenching inspection covers the excavation, protective systems, adjacent ground, and atmospheric conditions before every shift and after any event that could increase h…
August 24, 2026Scaffolding Inspection Checklist for Construction Sites
Before every shift, a competent person must inspect the entire scaffold — here is exactly what that inspection covers, where crews most often fail, and how to document it so it hol…
July 21, 2026Fall Protection Inspection Checklist for Construction Sites
Every personal fall arrest system component must be inspected before each use — here is exactly what a competent person checks, the violations that draw the most OSHA citations, an…
July 15, 2026How to Run an Effective Toolbox Talk on a Construction Site
A toolbox talk is a short, focused safety briefing a crew holds before work starts — usually five to ten minutes, on one specific hazard tied to the day's actual tasks. Done consis…
July 10, 2026See how Jobsite handles this in practice: Safety & compliance on the platform →